Independientemente del tipo de DTF PRINTER que utilice, es fundamental manejarla con cuidado. Un buen mantenimiento no solo reduce los costos de reparación, sino que también disminuye indirectamente el costo por impresión. ¿Qué debe tener en cuenta al utilizar una impresora DTF de YIQIA DIGITAL?
1. Verifique que la impresora esté colocada en una superficie plana.
Si la impresora DTF no está nivelada, los patrones de impresión serán irregulares, lo que puede generar defectos en los productos y pérdidas innecesarias.
2. Revise diariamente el suministro de tinta.
Asegúrese de que los niveles de tinta sean suficientes. Cuando la tinta esté a punto de agotarse, reemplácela a tiempo para evitar que entre aire en los conductos.
3. Inspeccione regularmente la bomba de tinta y las almohadillas de limpieza.
Si la bomba no gira correctamente o no alcanza la velocidad necesaria, el motor continuará girando en vacío, lo que podría dañar la máquina. Además, si la almohadilla está floja, es muy probable que dañe el cabezal de impresión.
4. Antes de apagar la máquina, regrese el cabezal a la posición inicial.
Al hacerlo, el cabezal se sella con la estación de mantenimiento, evitando que la tinta se seque por contacto prolongado con el aire. Mantener el cabezal en estado húmedo ayuda a prevenir obstrucciones y prolonga su vida útil.
YIQIA DIGITAL opera en numerosos países, tanto en mercados emergentes como en mercados desarrollados. Contamos con un sólido sistema de ventas y nos dedicamos a ayudar a nuestros clientes a mejorar su negocio de impresión digital con servicios profesionales y una experiencia de primer nivel.
¿Desea saber más? ¡Contáctenos! En YIQIA DIGITAL estamos listos para brindarle asesoramiento personalizado.
Regardless of the type of DTF PRINTER, care should be taken when using it. Taking good care of the DTF PRINTER can directly reduce the maintenance cost and at the same time indirectly reduce the printing cost. What should we pay attention to when using the YIQIA DIGITAL DTF PRINTER?
1. Check whether the printer is placed flat, if the DTF PRINTER is not placed flat, the print pattern is not uniform, resulting in a defective product, and increasing unnecessary loss.
2. Daily check to confirm the supply of ink, The ink is about to the bottom of the ink should be replaced in a timely manner to avoid the ink tube into the air.
3. Regularly check the printer’s ink pump, and ink pad, to avoid affecting the machine and printhead.
Ink pump does not turn or the speed does not meet the demand for ink supply, the motor will continue to idle damage to the machine; the ink pad slack, it is easy to damage the printhead.
4. Before shutting down, the printhead control back to the initial position, so that the printhead is in the original position with the ink stack closely together, the ink stack can be sealed to protect the ink in the printhead from becoming dry due to prolonged contact with the air, moisturized state of the printhead is not easy to block, you can ensure that the service life of the printhead.
YIQIA DIGITALhas a global presence in many countries, including emerging and mature markets. We have a well-established sales system and are committed to helping our customers improve their digital printing business with our expertise and first-class service.
If you want to know more, please click the contact information below, YIQIA DIGITAL is at your service.
En esta era de rápido desarrollo, la eficiencia y la calidad se han convertido en factores clave en la competencia del mercado, y lasimpresoras DTF (directo a película) no son una excepción. Si bien se aumenta la velocidad de impresión, mantener la calidad de impresión es de suma importancia. A continuación, presentaremos algunos métodos para ajustar la velocidad de impresión de DTF sin comprometer la calidad de impresión:
1. Selección de boquilla
El modelo y la cantidad de boquillas se encuentran entre los factores cruciales que determinan la velocidad de impresión. Los diferentes modelos de boquillas ofrecen diferentes velocidades de impresión y precisión. Actualmente, las boquillas EPSON se consideran ampliamente como la mejor opción, pero en circunstancias específicas, se pueden considerar otros modelos de boquillas para equilibrar velocidad y calidad.
2. Software de impresión
Diferentes programas de impresión pueden afectar la velocidad de impresión. Además, la configuración del software de impresión también puede ajustar la velocidad de impresión. Por ejemplo, aumentar el difuminado puede disminuir la velocidad de impresión y la impresión a una cara suele ser más lenta que la impresión a doble cara.
3. Precisión de impresión
La precisión de la impresión es inversamente proporcional a la velocidad de impresión; Una mayor precisión a menudo significa una impresión más lenta. Para la producción a gran escala, una precisión de impresión de 720*720 DPI suele ser suficiente para cumplir con los requisitos.
4. Conteo de PASOS
El recuento de PASA está inversamente relacionado con la velocidad de impresión, pero directamente con la calidad de impresión. Los recuentos PASS comunes incluyen 4PASS, 6PASS y 8PASS. En general, 4PASS es adecuado para impresiones normales, mientras que 6PASS u 8PASS son adecuados para impresiones con mayor precisión y exigencias de color.
5. Modos de velocidad de impresión
El software de impresión común suele ofrecer tres modos: baja velocidad, velocidad media y alta velocidad. Estos modos no difieren significativamente en la calidad de impresión, pero tienen un impacto notable en la eficiencia de la impresión. Normalmente, los modos de velocidad media y alta son los más utilizados y puede elegir el modo de impresión de la impresora DTF según los requisitos específicos.
Al controlar cuidadosamente los factores anteriores, puede ajustar la velocidad de impresión de su impresora DTF para satisfacer las diversas demandas del mercado. Una velocidad de impresión más rápida le permite responder más rápidamente a los requisitos del mercado de impresión de prendas y asegurar los pedidos con antelación, al tiempo que garantiza la estabilidad de la calidad de impresión.
YIQIA DIGITAL tiene presencia mundial en muchos países, incluidos mercados emergentes y maduros. Tenemos un sistema de ventas bien establecido y estamos comprometidos a ayudar a nuestros clientes a mejorar su negocio de impresión digital con nuestra experiencia y servicio de primera clase.
Si desea saber más, haga clic en la información de contacto que aparece a continuación, YIQIA DIGITAL está a su servicio.
In this era of rapid development, efficiency and quality have become key factors in market competition, and DTF (direct-to-film) printers are no exception. While increasing printing speed, maintaining print quality is of paramount importance. Below, we will introduce some methods to adjust the printing speed of DTF without compromising print quality:
1. Nozzle Selection
The model and quantity of nozzles are among the crucial factors determining printing speed. Different nozzle models offer varying printing speeds and precision. Currently, EPSON nozzles are widely regarded as the best choice, but in specific circumstances, other nozzle models may be considered to balance speed and quality.
2. Printing Software
Different printing software can have an impact on printing speed. Furthermore, the settings within printing software can also adjust printing speed. For example, increasing feathering can decrease printing speed, and single-sided printing is usually slower than double-sided printing.
3. Printing Precision
Printing precision is inversely proportional to printing speed; higher precision often means slower printing. For large-scale production, a printing precision of 720*720 DPI is typically sufficient to meet requirements.
4. PASS Count
PASS count is inversely related to printing speed but directly related to print quality. Common PASS counts include 4PASS, 6PASS, and 8PASS. In general, 4PASS is suitable for regular printing, while 6PASS or 8PASS is suitable for prints with higher precision and color demands.
5. Printing Speed Modes
Common printing software typically offers three modes: low-speed, medium-speed, and high-speed. These modes do not significantly differ in print quality but have a notable impact on printing efficiency. Typically, medium-speed and high-speed modes are the most commonly used, and you can choose the DTF printer’s printing mode based on specific requirements.
By carefully controlling the above factors, you can adjust the printing speed of your DTF printer to meet various market demands. Faster printing speed allows you to respond more swiftly to the requirements of the garment printing market, and secure orders ahead of time, while ensuring the stability of print quality.
YIQIA DIGITALhas a global presence in many countries, including emerging and mature markets. We have a well-established sales system and are committed to helping our customers improve their digital printing business with our expertise and first-class service.
If you want to know more, please click the contact information below, YIQIA DIGITAL is at your service.
“Debilitamiento de la cobertura de tinta blanca” sugiere que la tinta blanca aplicada durante el proceso DTF no proporciona el nivel deseado de opacidad o cobertura. A continuación se indican algunos pasos que puede seguir para solucionar este problema:
1. Compruebe si hay dobleces en el tubo de tinta blanca
Las curvaturas de los tubos de tinta blanca pueden provocar un flujo deficiente de la tinta blanca, lo que a su vez provoca una cobertura deficiente de la tinta blanca.
2. Cambiar el amortiguador de la impresora DTF
Además de los comunes inyectores obstruidos, también existe la posibilidad de que los amortiguadores estén obstruidos.
Pruebe diferentes películas DTF PET para encontrar la que mejor se adapte a la máquina que utiliza y a los consumibles DTF.
4. Sustitución por tinta DTF nueva
Después de sustituir la tinta, agite ligeramente el cartucho (la tinta puede haber estado demasiado tiempo en reposo).
5. Intente cambiar a otro software RIP
El software RIP desempeña un papel importante en el proceso de impresión. Determina el color, el patrón de trama y la resolución de la impresión final, garantizando una reproducción fiable del color. (A veces los problemas con los colores de impresión provienen de ajustes incorrectos del software RIP).
6. Limpieza del cabezal de impresión
Es posible que el cabezal de impresión esté obstruido, o que haya aire en el tubo, etc.
7. La bomba de recirculación no funciona correctamente
Encienda la bomba de recirculación para comprobar que funciona correctamente.
8. Modifique o sustituya el perfil ICC por otro diferente.
Por último, se puede buscar ayuda profesional:
Consulte al servicio técnico del fabricante:
Si ha probado varios ajustes y sigue teniendo problemas de cobertura, póngase en contacto con los fabricantes de impresoras y tintas para obtener asistencia técnica. Es posible que le proporcionen orientación específica en función de su equipo y materiales.
Asistencia profesional:
Si el problema persiste y no puede resolverlo, considere la posibilidad de consultar a profesionales o técnicos especializados en impresión DTF. Pueden ofrecerle información experta y soluciones adaptadas a su configuración.
YIQIA DIGITAL tiene presencia mundial en muchos países, incluidos mercados emergentes y maduros. Tenemos un sistema de ventas bien establecido y estamos comprometidos a ayudar a nuestros clientes a mejorar su negocio de impresión digital con nuestra experiencia y servicio de primera clase.
Si desea saber más, haga clic en la información de contacto que aparece a continuación, YIQIA DIGITAL está a su servicio.
“Weakening of white ink coverage” suggests that the white ink applied during the DTF process is not providing the desired level of opacity or coverage. Here are some steps you can take to address this issue:
1. Check for bends in the white ink tube
Bending of the white ink tubes can lead to poor white ink flow, which in turn leads to poor white ink coverage.
2. Change DTF Printer’s Damper
In addition to the common clogged nozzles, there is also the possibility of clogged dampers.
3. Test Different Films
The type of DTF PET Film you use can affect ink coverage.
Please try different DTF PET Films to find the best match with the machine you are using and the DTF consumables.
4. Replacement with new DTF Ink
After replacing the ink, shake the cartridge slightly (the ink may have been sitting too long).
5. Try changing to another RIP software
RIP software plays an important role in the printing process. It determines the color, screen pattern, and resolution of the final print, ensuring reliable color reproduction. (Sometimes problems with print colors come from incorrect RIP software settings.)
6. Cleaning the print head
The print head may be clogged, or there is air in the tube, etc.
7. The recirculation pump is not working properly
Turn on the circulation pump to check for proper operation.
8. Modify or replace the ICC profile with a different one.
Finally, professional help can be sought:
Consult Manufacturer Support:
If you’ve tried various adjustments and still face coverage issues, reach out to the printer and ink manufacturers for technical support. They may provide specific guidance based on your equipment and materials.
Professional Assistance:
If the issue persists and you cannot resolve it, consider consulting with professionals or technicians who specialize in DTF printing. They can provide expert insights and solutions tailored to your setup.
YIQIA DIGITAL has a global presence in many countries, including emerging and mature markets. We have a well-established sales system and are committed to helping our customers improve their digital printing business with our expertise and first-class service.
If you want to know more, please click the contact information below, YIQIA DIGITAL is at your service.
¿Sabes cómo elegir los cabezales de impresión adecuados para tu impresora DTF? ¡Estamos aquí para ayudarte!
En este artículo, compararemos tres de los principales cabezales de impresión DTF: el I3200-A1, el I3200 (4720) y el cabezal XP600. Repasaremos sus especificaciones y características para que puedas tomar una decisión informada según tus necesidades. ¡Empecemos!
Por qué elegir cabezales de impresión EPSON para la impresión DTF?
El cabezal de impresión es una de las partes más importantes de la impresora DTF y desempeña un papel vital en la calidad de impresión. Una vez que el cabezal de impresión se obstruye o se quema, la máquina no funcionará normalmente. Los cabezales de impresión EPSON son los más estables después de varias pruebas de comparación.
Cabezal de impresión EPSON XP600 para impresión DTF YIQIA DIGITAL
Ventajas y características del Epson XP600
Cabezal de impresión económico a base de agua.
Rentable y moderadamente estable.
Tiene un sistema avanzado de control de puntos que reduce las bandas y garantiza una calidad de imagen constante.
Las desventajas del Epson XP600
El XP600 tiene colores menos saturados que el I3200（4720）.
Dependiendo de cuánto se use y cómo se mantenga, la durabilidad y la vida útil real están entre 3 y 6 meses, no tan buena como la del I3200(4720).
Costo
Los cabezales de repuesto XP600 cuestan entre $250 y $350.
Adecuado para
Adecuado para aquellos con un presupuesto ajustado que quieran comenzar su negocio correctamente.
Cabezal de impresión EPSON I3200(4720) para impresión DTF YIQIA DIGITAL
Ventajas y características del Epson I3200(4720)
Alta resolución.
Velocidades de impresión rápidas.
Frecuencia de pulverización más alta que el XP600.
Utiliza la tecnología piezoeléctrica de película delgada (TFP).
Rinde mejor que el XP600 en cuanto a saturación de color, velocidad de impresión y precisión de impresión.
Las desventajas del Epson I3200(4720)
Requiere una tarjeta de descifrado para su uso.
El rendimiento del color no es tan bueno como el del I3200-A1.
Dependiendo de cuánto se use y cómo se mantenga, la durabilidad y la vida útil real están entre 3 y 9 meses, no tan buena como la del I3200.
Costo
Los cabezales de repuesto I3200(4720) cuestan entre $550 y $600.
Adecuado para
Clientes que exigen calidad de impresión y tienen un presupuesto ajustado.
Cabezal de impresión EPSON I3200-A1 para impresión DTF YIQIA DIGITAL
Ventajas y características del Epson I3200-A1
Compatibilidad de tinta más amplia.
Calidad de impresión altamente precisa.
Fuerza de voltaje estable y equilibrada para la inyección de tinta.
Velocidades de impresión aproximadamente un 30% más rápidas que el I3200(4720).
La durabilidad y la vida útil real están entre las mejores de todos los cabezales de impresión.
El volumen de tinta y el rendimiento del color en la inyección de tinta son superiores a los del I3200 (4720).
Las desventajas del Epson I3200-A1
Alto precio, no adecuado para clientes con un presupuesto ajustado.
Costo
Los cabezales de repuesto I3200-A1 cuestan entre $850 y $900.
Adecuado para
Clientes que buscan impresiones de alta calidad.
Tu elección final debería basarse en tus necesidades y presupuesto. Una combinación de las ventajas, desventajas y aplicabilidad mencionadas anteriormente debería ayudarte a tomar una decisión informada sobre el cabezal de impresión EPSON más adecuado para tu impresora DTF.
YIQIA DIGITAL tiene presencia mundial en muchos países, incluidos mercados emergentes y maduros. Tenemos un sistema de ventas bien establecido y estamos comprometidos a ayudar a nuestros clientes a mejorar su negocio de impresión digital con nuestra experiencia y servicio de primera clase.
Si desea saber más, haga clic en la información de contacto que aparece a continuación, YIQIA DIGITAL está a su servicio.
Do you know how to pick the right printheads for your DTF Printer? We’re here to help!
In this article, we’ll compare three of the top DTF printheads – the I3200-A1, the I3200 (4720) and the XP600 printhead. We’ll go over their specifications and features so you can make an informed decision based on your needs.
Why Choose EPSON Printheads for DTF Printing
The printhead is one of the most important parts of the DTF printer and plays a vital role in the print quality. Once the printhead is clogged or burnt, the machine will not operate normally. EPSON printheads are the most stable after various comparison tests.
EPSON XP600 Printhead for DTF Printing YIQIA DIGITAL
Pros & Features of Epson XP600
Economical water-based printhead.
Cost-effective and moderately stable.
It has an advanced dot control system that reduces banding and ensures consistent image quality.
The Cons of Epson XP600
XP600 has less saturated colors than the I3200（4720）.
Depending on how often it is used and how it is maintained, durability and real lifespan are between 3 to 6 months, not as good as the I3200(4720).
Cost
Changing the head will cost you $250 to $350.
Suit for
Fit for those on a tight budget and want to start their business proprely.
EPSON I3200(4720) Printhead for DTF Printing YIQIA DIGITAL
It performs better than XP600 in terms of color saturation, print speed and print accuracy.
The Cons of Epson I3200(4720)
Requires a decryption card to use.
Color performance not as good as I3200-A1.
Depending on how often it is used and how it is maintained, durability and real lifespan are between 3 to 9 months, not as good as the I3200.
Cost
Changing the head will cost you $550 to $600.
Suit for
Customers who demand print quality and are on a budget.
EPSON I3200-A1 Printhead for DTF Printing YIQIA DIGITAL
Pros & Features of Epson I3200-A1
Wider ink compatibility.
Highly accurate print quality.
Stable and balanced voltage strength for inkjet.
Printing speeds approximately 30% faster than the I3200(4720).
Durability and actual service life are among the best of all printheads.
Inkjet ink volume & color performance are superior to the I3200 (4720).
The Cons of Epson I3200-A1
High price, not suitable for customers on a tight budget.
Cost
I3200-A1 replacement heads cost between $850 to $900.
Suit for
Customers looking for high quality prints.
Your final choice should be based on your needs and budget. A combination of the above mentioned advantages, disadvantages and applicability should help you make an informed decision on the most suitable Epson printhead for your DTF printer.
YIQIA DIGITAL has a global presence in many countries, including emerging and mature markets. We have a well-established sales system and are committed to helping our customers improve their digital printing business with our expertise and first-class service.
If you want to know more, please click the contact information below, YIQIA DIGITAL is at your service.
Comparación entre la tinta DTF (Direct to Film) y la tinta de sublimación basada en diferentes características:
Ingrediente:
La tinta DTF (Direct to Film) es un tipo de tinta de pigmento.
Las tintas de pigmento están compuestas por diminutas partículas sólidas, conocidas como pigmentos, suspendidos en un portador líquido. Estos pigmentos proporcionan el color en la tinta. Las tintas de pigmento son conocidas por su excelente durabilidad del color, resistencia a la decoloración y amplia gama de colores.
La tinta de sublimación es una tinta a base de colorantes que contiene colorantes solubles en agua.
Estos colorantes están dispersos en un portador líquido y penetran la superficie del papel de transferencia durante la impresión. Cuando se exponen al calor y la presión durante el proceso de sublimación, los colorantes se convierten en gas y se adhieren a las fibras de poliéster del sustrato (por ejemplo, tela de poliéster o materiales recubiertos de polímero). Esto da como resultado una impresión permanente y vibrante con una excelente saturación y durabilidad del color.
¿Se puede usar otra tinta para la impresión de sublimación/DTF?
No, cada uno de estos métodos de impresión requiere tipos específicos de tinta formulados para funcionar con sus respectivos procesos y materiales.
Es esencial utilizar la tinta correcta para cada método de impresión para asegurar impresiones de alta calidad y duraderas. El uso de la tinta equivocada puede resultar en resultados de color deficientes, falta de adherencia y posiblemente dañar la impresora.
Siempre verifica las recomendaciones del fabricante de la impresora y utiliza tintas diseñadas específicamente para el proceso de impresión que estás utilizando, ya sea la sublimación o la impresión DTF.
YIQIA DIGITAL tiene presencia mundial en muchos países, incluidos mercados emergentes y maduros. Tenemos un sistema de ventas bien establecido y estamos comprometidos a ayudar a nuestros clientes a mejorar su negocio de impresión digital con nuestra experiencia y servicio de primera clase.
Si desea saber más, haga clic en la información de contacto que aparece a continuación, YIQIA DIGITAL está a su servicio.
El polvo termofusible es un material indispensable en la tecnología de transferencia DTF (Direct to Film). El polvo TPU se utiliza ampliamente en el proceso de transferencia DTF, y puedes encontrar tanto polvo blanco como negro en el mercado.
La diferencia entre el polvo blanco y el negro es la siguiente:
El polvo blanco es adecuado para ropa de cualquier color de tela, aunque generalmente se utiliza más en prendas blancas o de colores claros.
El polvo negro está compuesto principalmente de polvo de TPU y carbón activado, lo que lo hace más adecuado para prendas negras o de colores oscuros. También es comúnmente utilizado en telas de poliéster y en bolsas.
Es importante tener en cuenta estas diferencias al elegir el polvo termofusible adecuado para la transferencia DTF, dependiendo del color y tipo de tela con el que estemos trabajando.
YIQIA DIGITAL tiene presencia mundial en muchos países, incluidos mercados emergentes y maduros. Tenemos un sistema de ventas bien establecido y estamos comprometidos a ayudar a nuestros clientes a mejorar su negocio de impresión digital con nuestra experiencia y servicio de primera clase.
Si desea saber más, haga clic en la información de contacto que aparece a continuación, YIQIA DIGITAL está a su servicio.
Let’s compare DTF (Direct to Film) ink and Sublimation ink based on different characteristics:
Ingredient:
DTF (Direct to Film) ink is a type of pigment ink.
Pigment inks are made up of tiny solid particles, known as pigments, suspended in a liquid carrier. These pigments provide the color in the ink. Pigment inks are known for their excellent color longevity, resistance to fading, and wide color gamut.
Dye-sublimation ink is a dye-based ink that contains water-soluble dyes.
These dyes are dispersed in a liquid carrier, and they penetrate the surface of the transfer paper during printing. When exposed to heat and pressure during the sublimation process, the dyes turn into a gas and bond with the polyester fibers in the substrate (e.g., polyester fabric or polymer-coated materials). This results in a permanent and vibrant print with excellent color saturation and durability.
Can you use other ink for sublimation/DTF printing?
No. Each of these printing methods requires specific types of ink that are formulated to work with their respective processes and materials.
It’s essential to use the correct ink for each printing method to ensure high-quality and long-lasting prints. Using the wrong ink can lead to poor color results, lack of adhesion, and potentially damage the printer.
Always check the printer manufacturer’s recommendations and use inks specifically designed for the printing process you are using, whether it’s sublimation or DTF printing.
YIQIA DIGITAL has a global presence in many countries, including emerging and mature markets. We have a well-established sales system and are committed to helping our customers improve their digital printing business with our expertise and first-class service.
If you want to know more, please click the contact information below, YIQIA DIGITAL is at your service.
En el mundo de la impresión, existen diversas técnicas disponibles para plasmar diseños en tela. Dos métodos populares son la impresión DTF (Direct-to-Film) y la impresión por sublimación.
En este artículo se examinan las ventajas y desventajas de la impresión DTF y la impresión por sublimación, así como sus escalas de producción y escenarios de aplicación. Su propósito es ayudar a los recién llegados a la industria de la impresión a tomar una decisión informada que se ajuste mejor a sus necesidades.
¿Qué es la impresión DTF?
La impresión DTF implica transferir la tinta directamente sobre una película especial, que luego se aplica a la tela utilizando una prensa térmica.
Ventajas de la impresión DTF
Impresiones vibrantes y de alta resolución con excelente saturación de color, lo que resulta en diseños visualmente atractivos.
Mayor flexibilidad de diseño, lo que permite detalles intrincados y obras de arte complejas.
Adecuada para una amplia gama de telas, incluyendo algodón, poliéster y mezclas.
Desventajas de la impresión DTF
Podría no ser tan duradera como otros métodos de impresión, lo que potencialmente puede provocar decoloración o grietas con el tiempo (se evitan estos problemas utilizando consumibles DTF de alta calidad).
Aplicación de la impresión DTF
La impresión DTF es adecuada para diversas aplicaciones, incluyendo ropa de moda, accesorios y textiles para el hogar. Ofrece una gran solución para imprimir diseños complejos en prendas, asegurando resultados de alta calidad y visualmente impactantes.
La impresión DTF es adecuada tanto para operaciones a pequeña escala como a gran escala. Ofrece una solución rentable para pequeñas empresas o personas que buscan producir diseños personalizados según la demanda.
¿Qué es la impresión por sublimación?
La impresión por sublimación es un método de impresión que transfiere un diseño a un material o tela utilizando tinta y calor. El tinte penetra en la tela, lo que resulta en impresiones duraderas y vibrantes. Muchas fábricas de prendas de vestir, así como fabricantes de personalización, utilizan la impresión por sublimación.
Ventajas de la impresión por sublimación
Excelente permanencia y durabilidad del color, lo que la hace adecuada para lavados frecuentes o exposición al aire libre.
Permite la impresión completa, cubriendo toda la tela de manera uniforme.
Comúnmente utilizada para ropa deportiva, prendas personalizadas y artículos promocionales.
Desventajas de la impresión por sublimación
No todos los tejidos ofrecen resultados perfectos en la impresión por sublimación. Se limita a tejidos sintéticos como el poliéster, ya que el tinte requiere una base polimérica para adherirse eficazmente.
Aplicación de la impresión por sublimación
La impresión por sublimación, con su durabilidad y producción de colores vibrantes, se utiliza comúnmente en la fabricación de ropa deportiva, camisetas, prendas personalizadas, artículos promocionales y regalos personalizados.
A menudo es más adecuada para la producción a gran escala debido a su eficiencia y capacidad para imprimir múltiples diseños simultáneamente.
Consideraciones clave al adquirir una impresora DTF y de sublimación
Asegurarse de la compatibilidad con la técnica de impresión específica.
Buscar un proveedor confiable de impresoras que cumpla con los requisitos de calidad de impresión, velocidad y versatilidad.
Considerar el sistema de tinta y las capacidades de gestión del color de la impresora para lograr una reproducción precisa y consistente del color.
Tener en cuenta el costo de los consumibles, los requisitos de mantenimiento y el soporte técnico proporcionado por el fabricante.
En conclusión, tanto la impresión DTF como la impresión por sublimación tienen sus ventajas y desventajas únicas. La elección entre estas técnicas depende de los requisitos específicos de su proyecto, escala de producción y aplicación deseada. Al tener en cuenta los puntos clave mencionados y realizar una investigación exhaustiva, se puede tomar una decisión informada y lograr resultados de impresión de alta calidad.
YIQIA DIGITAL tiene presencia mundial en muchos países, incluidos mercados emergentes y maduros. Tenemos un sistema de ventas bien establecido y estamos comprometidos a ayudar a nuestros clientes a mejorar su negocio de impresión digital con nuestra experiencia y servicio de primera clase.
Si desea saber más, haga clic en la información de contacto que aparece a continuación, YIQIA DIGITAL está a su servicio.
In the world of printing, there are various techniques available to bring designs to life on fabric. Two popular methods are DTF (Direct-to-Film) Printing and Sublimation Printing.
This article examines the advantages and disadvantages of DTF printing and sublimation printing, along with their production scales and application scenarios. Its purpose is to assist newcomers to the printing industry in making an informed decision that best suits their needs.
What is DTF Printing?
DTF printing involves transferring ink directly onto a special film, which is then applied to the fabric using a heat press.
DTF Printing Advantages
Vibrant and high-resolution prints with excellent color saturation, resulting in visually appealing designs.
Greater design flexibility, allowing for intricate details and complex artwork.
Suitable for a wide range of fabrics, including cotton, polyester, and blends.
DTF Printing Disadvantages
May not be as durable as other printing methods, potentially leading to fading or cracking over time (Avoid such problems by using high-quality DTF consumables).
DTF Printing Application
DTF printing is well-suited for various applications, including fashion apparel, accessories, and home textiles. It provides a great solution for printing complex designs on garments, ensuring high-quality and visually striking results.
DTF printing is suitable for both small-scale and large-scale operations. It offers a cost-effective solution for small businesses or individuals looking to produce custom designs on demand.
What is Sublimation Printing?
Sublimation printing is a method of printing that transfers a design into a material or fabric using ink and heat. The dye penetrates the fabric, resulting in long-lasting and vibrant prints. Many garment factories as well as personalization manufacturers are using sublimation printing.
Sublimation Printing Advantages
Excellent color permanence and durability, making it suitable for frequent washing or outdoor exposure.
Allows for all-over printing, covering the entire fabric seamlessly.
Commonly used for sportswear, custom apparel, and promotional items.
Sublimation Printing Disadvantages
Not all fabrics create perfect results when it comes to sublimation printing. Limited to synthetic fabrics such as polyester, as the dye requires a polymer base to bond effectively.
Sublimation Printing Application
Sublimation printing, with its durability and vibrant color output, is commonly used in the production of sportswear, jerseys, custom apparel, promotional items, and personalized gifts.
Often more suitable for large-scale production due to its efficiency and ability to print multiple designs simultaneously.
Key Considerations when Purchasing DTF & Sublimation Printer
Ensure compatibility with the specific printing technique.
Look for a reliable printer supplier or printer that meets print quality, speed, and versatility requirements.
Consider the ink system and color management capabilities of the printer to achieve accurate and consistent color reproduction.
Factor in the cost of consumables, maintenance requirements, and technical support provided by the manufacturer.
In conclusion, both DTF Printing and Sublimation Printing have their unique advantages and disadvantages. The choice between these techniques depends on the specific requirements of your project, production scale, and desired application. By considering the key points mentioned and conducting thorough research, you can make an informed decision and achieve high-quality printing results.
YIQIA DIGITAL has a global presence in many countries, including emerging and mature markets. We have a well-established sales system and are committed to helping our customers improve their digital printing business with our expertise and first-class service.
If you want to know more, please click the contact information below, YIQIA DIGITAL is at your service.
La película de PET DTF, o película de PET de transferencia térmica directa, es un tipo utilizado habitualmente en la industria de la impresión. Es conocida por su alta calidad de impresión y su durabilidad. Sin embargo, existen dos tipos de película DTF PET: simple y doble. En esta entrada del blog, vamos a discutir las diferencias entre los dos.
Película DTF PET de una cara
Rendimiento del color
Las películas de una cara ofrecen un aspecto más neutro y natural. Por lo tanto, son adecuadas para conseguir un aspecto vintage, como sepia o blanco y negro.
Presupuesto de producción
La película de PET DTF simple es la mejor para aplicaciones de impresión de bajo volumen o para aquellos con un presupuesto ajustado.
Comodidad de producción
La película de PET DTF de una cara es brillante por el reverso, lo que provocó que el rodillo de papel de algunas impresoras no funcionara bien con ella, haciendo que la película se deslizara en ocasiones. Cabe destacar que estos problemas se produjeron en un número reducido de casos. La mayoría de nuestros clientes y de los participantes del sector siguen utilizando la película DTF PET de una cara y no tienen ningún problema con ella.
Película de PET DTF de doble cara
Rendimiento del color
La película DTF PET de doble cara puede manejar más tinta y calor, lo que se traduce en impresiones de mayor calidad y más duraderas.
Presupuesto de producción
La película DTF PET de doble cara es la mejor para aplicaciones de impresión de gran volumen o para aquellos que requieren impresiones duraderas y de alta calidad.
Comodidad de producción
Doble cara DTF PET Film con fricción, es más estable que la alimentación de una sola cara, la película no se desplazará, también es eficaz en la prevención de la electricidad estática, y la calidad de impresión es mayor.
Cuándo utilizar película de PET DTF simple o doble
Ambos tipos de película DTF PET Film proporcionan una excelente calidad de impresión y durabilidad, la comodidad y el coste son los principales factores que las diferencian. Es importante tener en cuenta los factores anteriores a la hora de elegir la película DTF PET adecuada para sus necesidades de impresión para asegurarse de obtener los mejores resultados posibles.
Póngase en contacto hoy mismo con nuestro director de ventas en el +86 157 5958 3971 o consulte nuestra selección de productos de impresión DTF en nuestro sitio web.
La fuga / corriente / goteo de la tinta DTF puede ser un problema común al imprimir con tinta DTF. Este problema puede ser causado por varios factores y aquí hay algunos pasos que puede seguir para resolver el problema de fuga / corriente / goteo / filtración de tinta DTF:
1. Compruebe si la película está húmeda
Puede intentar imprimir el mismo patrón con una nueva película con los mismos ajustes para comprobar si su película es buena. Además, asegúrese de que la función de calentamiento frontal de su impresora esté encendida, ya que esto ayuda a que la tinta se seque.
2. Revisa la carga de tinta
Se recomienda imprimir con un 60-70% de tinta blanca. Sabemos que algunos clientes desean imprimir el 100% de blanco para obtener una buena cobertura, en este caso, existe la posibilidad de problemas de flujo de tinta. Se recomienda intentar disminuir la carga de tinta blanca, si no es posible, puede probar la película DTF de doble cara de YIQIA DIGITAL que tiene una capacidad de absorción de tinta perfecta.
3. Limpia el cabezal de impresión
Si el cabezal de impresión está obstruido o sucio, puede causar problemas de flujo o goteo de tinta. Puede usar una solución de limpieza o un paño sin pelusa para limpiar el cabezal de impresión. Es esencial realizar un mantenimiento regular en su impresora para evitar obstrucciones y asegurarse de que la tinta fluya correctamente.
4. Verifica la calidad de la tinta
Asegúrate de estar usando una tinta DTF de alta calidad como YIQIA DIGITAL DTF INK. La tinta de baja calidad puede causar problemas de flujo y afectar la calidad general de la impresión. La tinta DTF de YIQIA DIGITAL está especialmente formulada para brindar excelentes resultados y minimizar problemas de flujo.
5. Verifica la vigencia de la tinta
Comprueba si el uso de la tinta ha pasado su fecha de caducidad, el uso de una tinta vencida tiende a provocar problemas de flujo de tinta.
6. Ajusta la velocidad de impresión
A veces, ajustar la velocidad de impresión puede ayudar a resolver el problema de la tinta DTF que fluye. Si la velocidad de impresión es demasiado alta, la tinta puede no tener suficiente tiempo para secarse, lo que provoca problemas de flujo o goteo de tinta. Reduce la velocidad de impresión y verifica si ayuda a solucionar el problema.
Siguiendo estos pasos, puede resolver el problema y producir impresiones de alta calidad con facilidad. Si todavía tienes preguntas, no dudes en hablar con YIQIA DIGITAL.
Para solucionar los problemas de desviación de color y colores faltantes en los patrones impresos, es importante comprender dónde se encuentran los problemas con la impresora DTF. Aquí hay seis soluciones comunes para la desviación de color y los colores faltantes:
1. Imprimir tiras de prueba
YIQIA DIGITAL recomienda que los clientes siempre impriman una tira de prueba antes de imprimir con DTF, ya que esto puede indicar si la impresora está funcionando correctamente.
2. Establecer la imagen de impresión DTF en modo CMYK.
En casos en los que la configuración de impresión es correcta, aún puede haber una desviación de color entre la pantalla del ordenador y el color de impresión real debido a las diferentes tecnologías que utilizan la pantalla del ordenador y la impresora DTF para representar los colores (es decir, modos RGB y CMYK).
3. Modificar la configuración de la tinta en el controlador de la impresora DTF para establecer la tinta “negra” como tinta “de color”.
4. La configuración del medio de impresión no coincide con el medio de impresión utilizado.
Ajuste la configuración del medio de impresión en el programa del controlador o reemplace el medio de impresión correspondiente. Si el medio está colocado hacia abajo, coloque el medio de impresión correctamente con la superficie impresa hacia arriba.
5. Verificar los cartuchos de tinta.
Los niveles bajos de tinta en los cartuchos pueden hacer que uno o más colores se agoten. Verifique los cartuchos de tinta para determinar si necesitan ser reemplazados.
6. Bloqueo de la boquilla de la impresora DTF.
Si la boquilla está bloqueada y no puede pulverizar tinta, también puede causar colores faltantes en ciertas áreas del patrón impreso. Utilice el sistema de limpieza automático de la impresora para limpiar la boquilla dos veces. Si esto no mejora la situación, use una solución de limpieza especializada para una limpieza adicional.
Al implementar estas soluciones, puede minimizar la desviación de color y los colores faltantes en sus patrones impresos DTF.
YIQIA DIGITAL tiene presencia global en muchos países, incluyendo mercados emergentes y maduros. Contamos con un sistema de ventas bien establecido y nos comprometemos a ayudar a nuestros clientes a mejorar su negocio de impresión digital con nuestra experiencia y servicio de primera clase.
Si desea conocer más, haga clic en la información de contacto a continuación, YIQIA DIGITAL está a su servicio.
To solve the problems of color deviation and missing colors in printed patterns, it is important to understand where the issues lie with the DTF printer.
Here are six common solutions to color deviation and missing colors:
1. Print test strips
YIQIA DIGITAL recommends that customers always print a test strip before DTF printing, as it can indicate whether the printer is functioning properly.
2. Set the DTF printing image to CMYK mode.
In cases where the print settings are correct, there may still be a color deviation between the computer display and the actual print color due to the different technologies used by the computer display and DTF printer to represent colors (i.e. RGB and CMYK modes).
3. Modify the ink settings in the DTF printer driver to set “black” ink as “color” ink.
4. The printing medium settings do not match the actual printing medium used.
Adjust the printing medium settings in the driver program or replace the matching printing medium. If the medium is facing downwards, place the printing medium correctly with the printed surface facing upwards.
5. Check the ink cartridges.
Low ink levels in the cartridges can result in one or more colors running out. Check the ink cartridges to determine whether they need to be replaced.
6. DTF printer nozzle blockage.
If the nozzle is blocked and cannot spray ink, it can also cause missing colors in certain areas of the printed pattern. Use the printer’s automatic cleaning system to clean the nozzle twice. If this does not improve the situation, use a specialized cleaning solution for further cleaning.
By implementing these solutions, you can minimize color deviation and missing colors in your DTF printed patterns.
YIQIA DIGITAL has a global presence in many countries, including emerging and mature markets. We have a well-established sales system and are committed to helping our customers improve their digital printing business with our expertise and first-class service.
If you want to know more, please click the contact information below, YIQIA DIGITAL is at your service.
Últimamente, la impresión DTF se utiliza mucho en la impresión de prendas de vestir. Hay muchos tipos diferentes de películas DTF PET que se pueden encontrar en el mercado, pero ¿cuál es la mejor? Hacemos un análisis desde diferentes aspectos para ayudarle a elegir.
1. Temperatura y tiempo de prensado en caliente
Las películas de desgarro en caliente suelen requerir una temperatura de prensado de entre 140-150°C durante 5-10 segundos. Las películas de desgarro en frío se prensan a una temperatura más alta que las películas de desgarro en caliente, generalmente entre 150-170°C y 10-20 segundos, dependiendo de la situación específica.
2. Diferencia de eficiencia
Pelado en caliente.se puede rasgar en 2-3 segundos, recomendado para aquellos que buscan una producción eficiente.
Pelado en frío.Film pelado en frío: Puede ser de unos 30 segundos y puede rasgar la película.
3. Color y elasticidad
Algunas personas dicen que el color de la película pelable en frío parece más brillante, pero según nuestra prueba, no hay mucha diferencia. Sin embargo, la estirabilidad es diferente según los distintos proveedores. YIQIA DIGITAL puede proporcionarle una solución integral para la película DTF PET, el polvo y la tinta.
4. Problemas de viscosidad
Pelado en caliente. Su capa antiadherente es relativamente fina, y existe la posibilidad de que se pegue si no se transfiere a tiempo tras la impresión.
Pelado en frío. Tiene un proceso de revestimiento posterior a base de aceite para la capa de liberación y no tiene este problema.
In general, both hot tear and cold tear have their advantages, so choose according to your needs. Whichever DTF PET film you choose, the most important point is that you need to find a stable supplier with quality assurance.
YIQIA DIGITAL tiene presencia mundial en muchos países, incluidos mercados emergentes y maduros. Tenemos un sistema de ventas bien establecido y estamos comprometidos a ayudar a nuestros clientes a mejorar su negocio de impresión digital con nuestra experiencia y servicio de primera clase.
Si desea saber más, haga clic en la información de contacto que aparece a continuación, YIQIA DIGITAL está a su servicio.
Si está buscando tinta DTF, es posible que se sienta abrumado por la gran cantidad de opciones disponibles. ¿Cómo elegir la tinta adecuada para sus necesidades de impresión? En este artículo, le daremos algunos consejos sobre cómo elegir la tinta DTF.
1. Compatibilidad de la tinta
Lo primero que debe tener en cuenta a la hora de elegir la tinta DTF es la compatibilidad con su impresora y con el film DTF PET. Diferentes tipos de impresoras y películas DTF PET pueden requerir diferentes tipos de tinta, así que asegúrese de que la tinta que elija sea compatible con su impresora y película DTF PET para asegurarse de obtener los mejores resultados.
2. Intensidad y consistencia del color
La tinta DTF es conocida por sus colores vibrantes y duraderos. Al elegir una tinta, busque una que ofrezca una excelente saturación del color y que sea resistente a la decoloración, lo cual es fundamental para producir impresiones de alta calidad. La TINTA DTF de alta calidad proporciona colores brillantes y vibrantes que se mantienen constantes en varias impresiones.
3. Compatibilidad de materiales
La tinta DTF puede utilizarse en una gran variedad de materiales, como algodón, poliéster e incluso cuero. Asegúrese de que la tinta que elige es adecuada para el material sobre el que va a imprimir.
4. Lavabilidad y durabilidad
La tinta que elija debe resistir los lavados repetidos y la exposición a la luz solar sin desteñirse ni agrietarse. Debe buscar una tinta formulada para proporcionar una excelente lavabilidad y durabilidad, de modo que sus impresiones duren mucho tiempo.
5. Reputación del proveedor
Cuando compre tinta DTF INK, asegúrese de que se la compra a un proveedor con buena reputación. De este modo se asegurará de obtener un producto de alta calidad, así como un buen servicio postventa.
Si tiene en cuenta estos factores, podrá elegir la tinta DTF perfecta para sus necesidades de impresión, lo que le garantizará impresiones duraderas y de alta calidad.
Cuando necesite comprar TINTA DTF rápidamente y sin preocupaciones, compre en yiqiadigital.com. Esta es una de las mejores formas de conseguir la tinta de alta calidad que necesitas, incluso puede que encuentres estos productos más asequibles de lo que piensas.
YIQIA DIGITAL tiene presencia mundial en muchos países, incluidos mercados emergentes y maduros. Tenemos un sistema de ventas bien establecido y estamos comprometidos a ayudar a nuestros clientes a mejorar su negocio de impresión digital con nuestra experiencia y servicio de primera clase.
Si desea saber más, haga clic en la información de contacto que aparece a continuación, YIQIA DIGITAL está a su servicio.
If you’re in the market for DTF ink, you may be feeling overwhelmed by the sheer number of options available. How do you choose the right ink for your printing needs? In this article, we’ll provide you with some tips on how to choose DTF ink.
1. Ink Compatibility
The first thing to consider when choosing DTF ink is compatibility with your printer and DTF PET Film. Different types of printers and DTF PET Film may require different types of ink, so ensure that the ink you choose is compatible with your printer and DTF PET Film to ensure that you get the best results.
2. Color Vibrancy and Consistency
DTF ink is known for its vibrant, long-lasting colors. When choosing an ink, look for one that offers excellent color saturation and is fade-resistant, which is critical to producing high-quality prints. High-quality DTF INK provides bright, vibrant colors that remain consistent over multiple prints.
3. Material Compatibility
DTF ink can be used on a variety of materials, including cotton, polyester, and even leather. Make sure that the ink you choose is suitable for the material you’ll be printing on.
4. Washability and Durability
The ink you choose should withstand repeated washing and exposure to sunlight without fading or cracking. You should look for an ink formulated to provide excellent washability and durability, so your prints will last long.
5. Reputation of Supplier
When buying DTF INK, make sure that you are buying it from a reputable supplier. This will ensure that you get a high-quality product as well as good after-sales service.
By considering these factors, you can choose the perfect DTF ink for your printing needs, ensuring that you can produce high-quality, long-lasting prints.
When you need to purchase DTF INK quickly and without any worry, shop at yiqiadigital.com. This is one of the best ways to get the high-quality ink you need, you may even find these products more affordable than you think.
YIQIA DIGITAL has a global presence in many countries, including emerging and mature markets. We have a well-established sales system and are committed to helping our customers improve their digital printing business with our expertise and first-class service.
If you want to know more, please click the contact information below, YIQIA DIGITAL is at your service.
DTF Ink flowing/running/dripping/leaking can be a common problem when printing with DTF ink. This issue can be caused by various factors, here are some steps you can take to solve the problem of DTF Ink flowing/running/dripping/leaking:
1. Check the Film is Damp
You can try to print the same pattern with a new film at the same settings to check if your film is good. Also, make sure your printer’s front heating function is on, it helps the ink to dry.
2. Check the Ink Loading
Recommend printing with 60-70% white ink. We know that some customers want to print 100% white to get good coverage, in this case, there is a possibility of ink+flowing problems.
It is recommended to try to decrease white ink loading, if it is not possible, you can try YIQIA DIGITAL Double-sided DTF Film which has perfect ink absorption ability.
3. Clean the Print Head
If the print head is clogged or dirty, it can cause the ink to flow or drip. You can use a cleaning solution or a lint-free cloth to clean the print head. It is essential to perform regular maintenance on your printer to prevent clogs and ensure that the ink flows correctly.
4. Check the Ink Quality
Ensure that you are using high-quality DTF ink like YIQIA DIGITAL DTF INK. Poor-quality ink can cause flow problems and affect the overall print quality. YIQIA DIGITAL DTF INK is specially formulated to provide excellent results and minimize flow issues.
5. Check the Ink Shelf Life
Check whether the use of ink has passed the shelf life, the use of expired ink tends to lead to ink flow problems.
6. Adjust the Print Speed
Sometimes, adjusting the print speed can help to solve the problem of DTF ink flowing. If the print speed is too high, the ink may not have enough time to dry, causing it to flow or drip. Slow down the print speed and see if it helps to solve the problem.
By following these steps, you can solve the problem and produce high-quality prints with ease. If you still have questions, welcome to talk with YIQIA DIGITAL.
La película de purpurina DTF es un tipo de película de transferencia que se utiliza para agregar un toque de brillo y glamour a telas y textiles. Está compuesta por una delgada capa de partículas de purpurina que están unidas a una película de poliéster mediante un adhesivo especial. Esto hace que sea fácil de aplicar a telas y textiles, creando un efecto deslumbrante que seguramente llamará la atención.
La película de purpurina DTF es una opción popular entre diseñadores de moda, fabricantes de textiles y entusiastas de bricolaje que desean agregar un toque de glamour a sus creaciones. Está disponible en una amplia gama de colores, desde clásicos dorados y plateados hasta tonos audaces y brillantes como rosa, azul y verde. Esto hace posible crear una variedad de diseños y combinaciones de colores, dependiendo del efecto deseado.
Una de las características clave de la película de purpurina DTF es su durabilidad. A diferencia de la purpurina tradicional que tiende a desprenderse y desprenderse con el tiempo, las partículas de purpurina en la película de purpurina DTF están firmemente unidas a la película, asegurando que no se desprendan incluso después de lavados y usos repetidos. Esto la hace ideal para usar en prendas de vestir como camisetas, chaquetas y jeans, así como accesorios como bolsos, sombreros y zapatos.
Otra característica importante de la película de purpurina DTF es su flexibilidad. La película puede cortarse fácilmente en cualquier forma deseada, lo que facilita la creación de diseños y logotipos personalizados. Esto hace posible crear una variedad de diseños y combinaciones de colores, dependiendo del efecto deseado.
Además de su durabilidad y flexibilidad, la película de purpurina DTF también ofrece una serie de otros beneficios. Por un lado, es fácil de aplicar usando una prensa térmica o plancha y se puede transferir a una variedad de telas y textiles, incluyendo algodón, poliéster y mezclas. Esto lo convierte en una forma conveniente y rentable de agregar brillo y brillo a una amplia gama de proyectos.
La película de purpurina DTF también es resistente a la decoloración, el agrietamiento y el pelado, lo que garantiza que tus diseños se vean geniales durante años. También es ecológica, ya que no contiene productos químicos ni toxinas dañinas, lo que la hace segura tanto para ti como para el medio ambiente.
Ya seas un diseñador profesional o un entusiasta del bricolaje, la película de purpurina DTF es una excelente opción para agregar un toque de glamour y brillo a tus proyectos. Con su amplia gama de colores, durabilidad, flexibilidad y otros beneficios, seguramente se convertirá en un elemento básico en tu arsenal de manualidades.
Para usar la película de purpurina DTF, solo necesitas tener tu diseño listo, colocarlo sobre tu tela o textil y aplicar calor con una prensa térmica o plancha. El calor activará el adhesivo en la película, haciendo que se adhiera a la tela y transfiera las partículas de purpurina sobre ella.
En resumen, la película de purpurina DTF es una película de transferencia versátil y duradera que es perfecta para agregar un toque de brillo y glamour a telas y textiles. Su durabilidad, flexibilidad y otros beneficios la convierten en una opción popular entre diseñadores de moda, fabricantes de textiles y entusiastas del bricolaje por igual. ¿Por qué no agregar un poco de brillo a tu próximo proyecto con la película de purpurina DTF?
YIQIA DIGITAL es el proveedor integral de impresión digital líder del sector. Suministramos papel de sublimación, tinta, consumibles DTF y las necesidades del cliente. Tenemos un sistema de ventas bien establecido y estamos comprometidos a ayudar a nuestros clientes a mejorar su negocio de impresión digital con nuestra experiencia y servicio de primera clase.
Si desea saber más, por favor haga clic en la información de contacto a continuación, YIQIA DIGITAL está a su servicio.
DTF PET Film, or Direct Thermal Transfer PET Film, is a type commonly used in the printing industry. It is known for its high-quality print output and its durability. However, there are two types of DTF PET Film: single and double. In this blog post, we will discuss the differences between the two.
Single-sided DTF PET Film
Color Performance
Single-sided films offer a more neutral and natural look. Therefore, they are suitable for achieving a vintage look such as sepia or black and white.
Production Budget
Single DTF PET Film is best for low-volume printing applications or for those on a budget.
Production Convenience
Single-side DTF PET Film is shiny on the back and this meant that some printers’ paper roller did not function well with it, causing the film to sometimes slip. It should be stressed that these issues occurred in a small number of cases. Most of our customers and most industry participants still use Single-side DTF PET Film and have no issues at all with it.
Double-sided DTF PET Film
Color Performance
Double-sided DTF PET Film can handle more ink and heat, resulting in higher quality and more durable prints.
Production Budget
Double-sided DTF PET Film is best for high-volume printing applications or for those who require high-quality and durable prints.
Production Convenience
Double-sided DTF PET Film with friction, is more stable than single-sided feeding, the film will not shift, is also effective in preventing static electricity, and the printing quality is higher.
When to Use Single or Double DTF PET Film?
Both types of DTF PET Film provide excellent print quality and durability, convenience and cost are the main factors that differentiate them. It is important to consider the above factors when choosing the right DTF PET Film for your printing needs to ensure that you get the best results possible.
Maybe you are also interested in this article: Why Is DTF Printing Growing In Popularity?
Contact our sales manager today at +86 13809049704 or browse our selection of DTF printing products on our website.
DTF Glitter Film is a type of transfer film that is used to add a touch of sparkle and glamour to fabrics and textiles. It is made up of a thin layer of glitter particles that are bonded onto a polyester film using a special adhesive. This makes it easy to apply to fabrics and textiles, creating a dazzling effect that is sure to catch the eye.
DTF Glitter Film is a popular choice among fashion designers, textile manufacturers, and DIY enthusiasts who want to add a touch of glamour to their creations. It is available in a wide range of colors, from classic gold and silver to bold and bright shades like pink, blue, and green. This makes it possible to create a variety of designs and color combinations, depending on the desired effect.
One of the key features of DTF Glitter Film is its durability. Unlike traditional glitter that tends to shed and flake off over time, the glitter particles in DTF Glitter Film are securely bonded to the film, ensuring that they do not come off even after repeated washing and wear. This makes it ideal for use on clothing items like t-shirts, jackets, and jeans, as well as accessories like bags, hats, and shoes.
Another important feature of DTF Glitter Film is its flexibility. The film can be easily cut into any desired shape, making it easy to create custom designs and logos. This makes it possible to create a variety of designs and color combinations, depending on the desired effect.
In addition to its durability and flexibility, DTF Glitter Film also offers a number of other benefits. For one, it is easy to apply using a heat press or iron and can be transferred onto a variety of fabrics and textiles, including cotton, polyester, and blends. This makes it a convenient and cost-effective way to add sparkle and shine to a wide range of projects.
DTF Glitter Film is also resistant to fading, cracking, and peeling, ensuring that your designs will look great for years to come. It is also eco-friendly, as it does not contain any harmful chemicals or toxins, making it safe for both you and the environment.
Whether you are a professional designer or a DIY enthusiast, DTF Glitter Film is a great choice for adding a touch of glamour and sparkle to your projects. With its wide range of colors, durability, flexibility, and other benefits, it is sure to become a staple in your crafting arsenal.
To use DTF Glitter Film only you have your design ready, place it onto your fabric or textile, and apply heat using a heat press or iron. The heat will activate the adhesive on the film, causing it to bond with the fabric and transfer the glitter particles onto it.
In summary, DTF Glitter Film is a versatile and durable transfer film that is perfect for adding a touch of sparkle and glamour to fabrics and textiles. Its durability, flexibility, and other benefits make it a popular choice among fashion designers, textile manufacturers, and DIY enthusiasts alike. So why not add some sparkle to your next project with DTF Glitter Film?
YIQIA DIGITAL is the industry’s leading one-stop provider of digital printing. We supply sublimation paper, ink, DTF consumables, and customer needs. We have a well-established sales system and are committed to helping our customers improve their digital printing business with our expertise and first-class service.
If you want to know more, please click the contact information below, YIQIA DIGITAL is at your service.
YIQIA DIGITAL has developed the third generation of DTF ink in response to customer demand feedback, using fast-drying solvents to solve the problem of oil return from storage of DTF PET film after printing for customers, and the printed film can be stored for a long time, dry and oil-free.
DTF INK CMYKW 5ColorsDTF INK CMYKW with Fluor Color
In ordinary DTF ink printing after the storage of the easy-to-return oil phenomenon, the transfer of the image blurred, seriously affecting the printing quality and shipping efficiency.
DTF INK CMYKW with Fluor
YIQIA DIGITAL’s upgraded DTF textile printing ink is colorful and can easily print various color patterns, text, logos, etc.
Advantages
✔Vibrant colors to meet customers’ rich color needs.
(Fluorescent colors, and spot color application solutions available)
✔Printed with a soft feel, comfortable and breathable.
✔High printing clarity, fine patterns, and good transfer effect.
✔High whiteness formula white ink with strong covering power.
✔Printed DTF PET film can be stored for a long time, dry and oil-free.
YIQIA DIGITAL is the industry’s leading one-stop provider of digital printing. We supply sublimation paper, ink, DTF consumables, and customer needs. We have a well-established sales system and are committed to helping our customers improve their digital printing business with our expertise and first-class service.
If you want to know more, please click the contact information below, YIQIA DIGITAL is at your service.
Direct-to-Film (DTF) printing is where the design is first printed on a special film and then transferred to the garment. It has similar durability to traditional screen printing.
How does DTF printing work?
DTF works by printing transfers on film and then heat-pressing them onto a variety of garments. Compared to DTG (direct-to-garment) technology, DTF printing is compatible with a wide range of materials.
Compared to DTG or screen printing technology, DTF printers are inexpensive. For optimal printing results, DTF powder, printable PET film, and high-quality DTF ink are required.
Why is DTF growing in popularity?
DTF printing offers greater versatility than other printing technologies. DTF can be printed on a variety of fabrics, including cotton, nylon, rayon, polyester, leather, silk, etc.
DTF printing has revolutionized the textile industry and provided an update on textile creation for the digital age. The process is simple: digital artwork is created, printed on PET film, and then transferred to the fabric.
More advantages of DTF printing:
Better print quality.
Simplicity and ease of learning.
No fabric pre-treatment is required.
The process uses about 75% less ink.
Unmatched quality and high productivity.
Compatibility with many types of materials.
Requires less space than other technologies.
DTF printing is ideal for small and medium-sized businesses.
The DTF process enables creators to start work faster than with DTG or screen printing technologies.
Although DTF printers look different from traditional paper printers, they function much like other inkjet printers, simply sending the design to a computer connected to the dtf printer for printing.
While screen printing still has a place in the apparel industry, DTF printing is more affordable for small businesses or textile organizations that want to make smaller orders.
In contrast, screen printing involves dozens of steps, which means it is usually cost-effective for only the simplest designs or for printing large quantities of items.
Dye migration problems such as discoloration, staining, and blending have been plaguing users for a long time. After processing, textiles are stored and stacked under pressure, transported with temperature changes and other factors, resulting in the migration of dye molecules from within the fabric to the fabric surface, resulting in a decrease in fabric color fastness.
Through technical innovation, YIQIA DIGITAL uses high-temperature disperse dyes to effectively improve the sublimation fastness of the ink, which can effectively solve dye migration problems such as discoloration, staining, and mixing after fabric transfer.
YIQIA DIGITAL Sublimation Transfer Ink-Plus has the characteristics of strong stability, good fluidity, and excellent printing performance, the overall color after the transfer is bright, and sublimation fastness of more than 3 levels, to meet the market demand for textile applications with high requirements for sublimation fastness.
Sublimation Transfer Ink-Plus Features
1. Simple and mature process, consistent with mainstream sublimation printing.
2. Sublimation fastness to grade 3 or more (SGS test data)
It is 1-2 levels higher than the sublimation ink commonly found in the market.
3. High color saturation and beautiful printing colors.
Ink Basic Performance Test
1. Smooth Performance Test
Simulate user conditions, using the EPSON I3200 print head equipped with the device to print samples, YIQIA DIGITAL Sublimation Transfer Ink-Plus has a good smooth performance to meet application needs.
2. Application Performance Test
Uniform and consistent ink dots, straight lines, clear handwriting, vivid color effect, fine picture quality, no diffusion of ink pile phenomenon, good compatibility between ink penetration, to meet the 1pass, 2pass high-quality printing needs.
Sublimation Transfer Ink-Plus Parameters
Applicable Printhead
DX7/DX6/DX5/5113/4720/I3200/DX4
Applicable Models
The machines with above printhead (Epson/Mimaki/Mutoh/Roland/MS etc.)
DTF Printing Offers More Design Options
It isn’t feasible to Screenprint complex patterns because of the amount of work involved. However, with DTF technology, printing complex and multi-colored graphics is different from printing a simple design.
DTF also makes it possible for creators to make DIY hats, handbags, and other items.
DTF Printing is More Sustainable and Less Expensive Than Other Methods
With the fashion industry’s increasing interest in sustainability, another advantage of DTF printing over traditional printing is its highly sustainable technology.
DTF printing helps prevent overproduction, a common problem in the textile industry. Additionally, the ink used in the digital direct injection printer is water-based and environmentally friendly.
DTF printing can realize one-off designs and eliminate the waste of unsold inventory.
Compared with screen printing, DTF printing is less expensive. For small batch orders, the unit printing cost of DTF printing is lower than the traditional screen printing process.
Learn More About DTF Technology YIQIA DIGITAL is here to help if you’d like to learn more about DTF technology. We can tell you more about the benefits of using this technology and help you learn whether it’s the right fit for your printing business.
The principle of DTF printing is straightforward – printing on a particular film, then transferring it to the chosen fabric or leather using a heat press.
With Valentine’s Day quickly approaching and on-demand personalized gifts being one of the most popular options, it’s time to get romantic gifts for your marketing campaign.
Personalized T-shirts make practical and romantic Valentine’s Day gifts. Use DTF printing to transfer memorable photos or designs onto clothing to create one-of-a-kind gifts.
A mug with a design is also one of the options for a thoughtful gift. They can be personalized with a specific phrase or pattern to make them memorable.
A personalized canvas bag also allows you to give a gift with special meaning. You can make the canvas bag distinctive and meaningful with a specific design or an illustration of your own creation.
With a custom printing hat that can also become a thoughtful original Valentine’s Day gift, a fisherman’s or baseball cap is a good choice.
A personalized custom pillowcase is a lovely and romantic gift that can bring a personal touch to your client’s home. It becomes even more unique when you print it with a personalized photo or design.
February 14 is always a great day to surprise your loved one. We offer you DTF printing solutions that are perfect for designing unique Valentine’s Day gifts.
With the development of science and technology, the DTF Printing market is now chasing a more cost-effective profit model. For more information, please feel free to contact YIQIA DIGITAL.
Maybe you are also interested in this article: Some tips for DTF Printing for beginners
YIQIA DIGITAL is a one-stop digital print solution supplier which is based in Nanjing, China. Main products include sublimation transfer paper/ sublimation transfer ink, DTF consumables, and needed for the customer.
We would like to share with you our quality control system for DTF PET Films. As we know DTF PET Film is a water-based product, which is easily affected by the environment. Therefore, for different batches of rolls, we keep samples for storage and record the batches, followed by corresponding quality tests, including print test, transfer test, wash test, etc. After passing the quality test, the goods are then packed and shipped.
With the development of science and technology, the DTF Printing market is now chasing a more cost-effective profit model. For more information, please feel free to contact YIQIA DIGITAL.
Maybe you are also interested in this article: How to Choose DTF PET Film?
With the advent of DTF technology at the end of 2020, its application is growing rapidly around the world. DTF has become a presence to be reckoned with in digital printing, and more and more companies are using DTF printing.
But after all, DTF is a new technology that has just emerged about 2 years. You can find a lot of discussions about DTF usage on the Internet, but there are few instruction manuals that can systematically answer all your questions. In this article today, we will share some of the questions that DTF users often encounter when using DTF.
1. How does DTF printing work?
DTF (Direct-To-Film) involves printing your design directly onto a film and then transferring it to a T-shirt made of cotton, polyester, or blends.
2. Can DTF PET Film be reused?
DTF PET films cannot be reused, please do not try to do so. This is because DTF PET films have a coating on them and the coating on the film has already been used during the printing and transfer process. Therefore, if you try to use it a second time, the ink will not be absorbed. The coating is one of the key factors in determining ink absorption and final printing results.
3. Can I print on DTF PET film and then transfer it to the T-shirt later?
Yes, store it in a sealed bag (polyethylene plastic) at room temperature and away from direct sunlight. We recommend printing them as soon as possible and then transferring them to ensure the best printing and transferring results.
4. How does DTF Printing feel on a shirt?
DTF has a similar feel to HTV(Heat Transfer Vinyl) but is lighter. You can feel the print on the shirt by touching it with your hand. It is smooth to the touch though. But the texture is different from the ordinary, unprinted shirt.
5. I have used DTG printer before, can I use DTG ink on DTF printer?
No. DTF inks (water-based) are chemically formulated differently. They are designed to react with DTF films and powders when heated to produce these incredible transfer effects. They also do not clog the print head as easily as DTG inks.
YIQIA DIGITAL has a global presence in many countries, including emerging and mature markets. We have a well-established sales system and are committed to helping our customers improve their digital printing business with our expertise and first-class service.
We will also bring you more DTF tips and suggestions in the future. If you want to know more, please click the contact information below.
CONTACT
WhatsApp: +86 13909049794
Wechat: +86 13815887545
E-mail: info@yiqiadigital.com
Product page: yiqiadigital.com/dtf
Facebook: facebook.com/YIQIADIGITAL
Instagram: instagram.com/yiqiadigital
Recently, DTF printing is widely used in garment printing. There are many different types of DTF PET films that can be found in the market, but which one is the best? We do analysis from different aspects to help you make a choice.
1. Difference in ingredients
Hot-peel film. In order to achieve a quick tear, the main component of the release layer is wax, which is relatively unstable and does not melt and apply easily.
Cold-peel film. The chemical component silicon dominates the release layer, which is easier to apply to the film, and the cold peel film is relatively stable.
2. Heat pressing temperature and time
Hot-peel films usually require a pressing temperature between 140-150°C for 5-10 seconds. Cold-peel films are pressed at a higher temperature than hot tear films, generally between 150-170°C and 10-20 seconds, depending on the specific situation.
3. Efficiency difference
Hot-peel film: 2-3 seconds can be satisfied to tear, recommended for those seeking efficient production.
Cold-peel film: It may be about 30 seconds and can tear film.
4. Color and Stretchability
Some people say the color of the cold-peel film looks brighter, but from our test, there is not much difference. However, the stretchability is different according to different suppliers. YIQIA DIGITAL can provide you with a one-stop solution for DTF PET film, powder, and ink.
5. Viscosity problems
Hot-peel film. Its release layer is relatively thin, and there is a possibility of sticking together if it is not transferred in time after printing.
Cold-peel film. It has an oil-based back-coating process for the release layer and does not have this problem.
In general, both hot tear and cold tear have their advantages, so choose according to your needs. Whichever DTF PET film you choose, the most important point is that you need to find a stable supplier with quality assurance.
Maybe you are also interested in this article: How to Choose DTF PET Film?
YIQIA DIGITAL has a global presence in many countries, including emerging and mature markets. We have a well-established sales system and are committed to helping our customers improve their digital printing business with our expertise and first-class service.
If you want to know more, please click the contact information below, YIQIA DIGITAL is at your service.
CONTACT
WhatsApp: +86 13909049794
Wechat: +86 13815887545
E-mail: info@yiqiadigital.com
Product page: yiqiadigital.com/dtf
Facebook: facebook.com/YIQIADIGITAL
Instagram: instagram.com/yiqiadigital
DTF PET Film
A DTF printer uses PET films, which are different from those used in screen printing. These films are also known as DTF Transfer Films in the market. DTF PET films are available in 75u and 100u thicknesses, depending on the temperature, and are also divided into two categories, cold-peel type films, and hot-peel type films, them has excellent-transferring characteristics. You can see more details about DTF PET films at YIQIA DIGITAL.
RIP Software for DTF Printer
For DTF printing, RIP software is an integral part, you will require specialized RIP software to handle your white and CMYK colors. This is because software affects the color performance, the printing characteristics of the ink, and the final print performance.
Hot-Melt Adhesive Powder
The hot-melt adhesive powder is designed to adhere inks to fabrics using DTF printing. Creates a thin adhesive layer on the wet ink deposited on the transfer film, this helps bind the colored pigments in your printer to the surface you are printing on.
DTF Printing Ink
DTF printing ink is specially designed for Direct to Film printing and heat transfer. This pigment ink formulation can reduce print head clogging and dryness. It can withstand countless washing cycles without fading. YIQIA DIGITAL offers different colors of DTF inks such as white, yellow, black, magenta, cyan, orange, green, and fluorescence pink & fluorescence yellow.
DTF Powder Shaker and Dryer
Direct Film printer components speed up your production by printing, powdering, shaking, and melting the powder for final and ready DTF transfers.
Curing Oven
This small industrial oven is used in the Curing process, to melt the printer’s hot melt powder, which then goes on the transfer film.
Heat Press Machine
A heat press is a type of machine that utilizes heat in order to apply designs onto various substrates, this equipment helps transfer the printed images on your film onto the desired surface or fabric.
Maybe you are also interested in this article: How to Choose DTF PET Film?
YIQIA DIGITAL has a global presence in many countries, including emerging and mature markets. We have a well-established sales system and are committed to helping our customers improve their digital printing business with our expertise and first-class service.
If you want to know more, please click the contact information below, YIQIA DIGITAL is at your service.
CONTACT
WhatsApp: +86 13909049794
Wechat: +86 13815887545
E-mail: info@yiqiadigital.com
Product page: yiqiadigital.com/dtf
Facebook: facebook.com/YIQIADIGITAL
Instagram: instagram.com/yiqiadigital
DTF printers require routine maintenance to work better. The following are the routine maintenance procedures for DTF printers.
1. Before the DTF printer is turned on, observe whether objects are piled up above and around the printer to ensure neatness around the machine.
2. Check whether the two sides of the printer are parallel before printing, otherwise, it will lead to an uneven printing pattern.
3. It is recommended to clean the printhead before printing every day or 2-3 days to clean once.
4. Check the remaining amount of ink every day, and add it in time when it is almost finished, to avoid the ink tube pumping the air in.
5. Reset the printhead after printing, because the printhead has a sealed protective cover in the initial position, it is not easy to clog, ensuring the service life of the printhead and the machine.
6. Turn off the power and network cable only after the printer is completely shut down, otherwise, it will seriously damage the print port and PC motherboard.
YIQIA DIGITAL has a global presence in many countries, including emerging and mature markets. We have a well-established sales system and are committed to helping our customers improve their digital printing business with our expertise and first-class service.
DTF printers often encounter the problem of clogged printheads, which need to be cleaned. The following are the cleaning precautions compiled by YIQIA DIGITAL. When cleaning the printhead, you must avoid the wrong operation, which will damage the printhead and affect the production schedule.
1. Due to the corrosive nature of the cleaning fluid, the printhead can not be completely submerged in the cleaning fluid. The correct operation is to add the appropriate amount of cleaning fluid into the printhead cleaning while avoiding the use of substandard quality cleaning fluid.
2. Printhead’s serious blockage only when the use of ultrasonic cleaner cleaning, time control in about 3 minutes.
3. If you want to replace a different brand of DTF ink, clean the ink cartridges and printheads to avoid mixing different inks to produce impurities that block the printhead, and change the color and quality of the ink, affecting the actual results of the print.
4. Determine that when the printer is not used for more than 48h, it is recommended to clean the ink in the printhead, otherwise, the ink in the nozzle will gradually evaporate because of the solvent and dry out resulting in clogging.
YIQIA DIGITAL DTF Printing Ink is specially designed for Direct to Film printing and heat transfer. This pigment ink formulation can reduce print head clogging and dryness. It can withstand countless washing cycles without fading.
YIQIA DIGITAL is the industry’s leading one-stop provider of digital printing. We supply sublimation paper, ink, DTF consumables, and customer needs. We have a well-established sales system and are committed to helping our customers improve their digital printing business with our expertise and first-class service.
DTF PET Film is made from a film base with a release coating, and DTF PET Film plays a key role in the final output quality of the printed product.
Just look at the following pictures and you will understand why you should choose high-quality DTF PET Film. Imagine if it is a poor quality DTF PET Film, in addition to poor printing results, it is likely to face the printing pattern is difficult to peel off, shake powder shake not clean, scratching the print head, and other problems, seriously affecting the production schedule. From a long-term business point of view, this is a very uneconomical investment.
To save on the cost of DTF printing, see YIQIA DIGITAL’s films for your dtf printing business: YIQIA DIGITAL DTF PET Films are carefully selected and tested, have exceptional ink receptivity, apparent printing effect, and have antistatic and anti-blocking properties.
It can be used for personalized T-shirts, shoes, towels, bags, non-woven pouches, and lots of others.
Advantages:
✔Smooth and clean surface
✔Low shrinkage, high-temperature resistance
✔Excellent physical and mechanical properties
✔The color of the pattern is realistic and complete, with no halo
✔Strong ink absorption capacity, the thick ink absorption layer
✔Small thickness tolerance, good matte, low heat shrinkage, good release
YIQIA DIGITAL DTF PET Films Parameter
Thickness: 75μ/100μ
Matte sides: Single/Double
Size: A3+/A3/A4, 50cm, 60cm, 120cm x 100m/roll
Type: Cold and hot peel-off
Core: 2inch/3inch
Applicable ink: DTF Inks
Max Transfer Temperature: 135℃
Pressing conditions: 110℃-135℃
Ink load: 400%
Maybe you are also interested in this article: How to Choose DTF PET Film?
YIQIA DIGITAL is the industry’s leading one-stop provider of digital printing. We supply sublimation paper, ink, DTF consumables, and customer needs. We have a well-established sales system and are committed to helping our customers improve their digital printing business with our expertise and first-class service.
If you want to know more, please click the contact information below, YIQIA DIGITAL is at your service.
CONTACT
WhatsApp: +86 13909049794
Wechat: +86 13815887545
E-mail: hale@yiqiadigital.com
Product page: yiqiadigital.com/dtf-pet-films
Facebook: facebook.com/YIQIADIGITAL
Instagram: instagram.com/yiqiadigital
With the development of digital printing technology, digital printing has penetrated various fields such as clothing, home textiles, car decoration, advertising, and personalization. The popularity of digital printing products will be getting higher in the future, and digital printing will become an inevitable trend in developing the printing and dyeing industry.
Sublimation printers in the last two years in the direction of higher speed development, from the very beginning of the 3/4 head machine to today’s 12/15 head machine, and then 30 head, or even more printhead sublimation printer, the rapid increase in production speed has gradually caught up with the traditional printing comprehensive cost. The cost is decreasing, and the competitiveness is becoming more and more noticeable compared with conventional printing.
Ink as one of the essential consumables for sublimation printing, ink transfer rate, drying speed and stable printing performance have a significant impact on the cost of the printing process.
What’s the standard for identifying sublimation ink?
A. High transfer rate: Ordinary high-concentration ink transfer rate is low and needs high-weight coated sublimation paper, and YIQIA DIGITAL high transfer rate ink can use 28 grams of sublimation paper, greatly reducing costs, and more competitive advantage.
B. Save ink: High transfer rate ink color concentration, high transfer rate, bright colors, bright colors in the flower pattern without the need to increase the amount of ink, you can achieve the color requirements.
C. Power saving: YIQIA DIGITAL high transfer rate ink because of fast drying, ink volume, heating, and drying conditions do not require high characteristics, you can achieve the purpose of energy saving. For example, the use of I3200 8-head high-speed machine heating and drying conditions: front-end heating temperature of 35%, the air volume of 40% (both the maximum setting value of 100%).
Product Name: YIQIA DIGITAL High Transfer Rate Ink
Product Capacity: 500ml/1kg/5kg
Color: CMYK
Print Media: Suitable for low-weight sublimation paper
Application: Containing more than 70% of chemical fiber fabric, used in fashion, swimwear, and sportswear, cycling clothing, home textiles, etc.
Shelf Life: 12 months
Storage Environment: Dry Environment, 0°C-35°C
YIQIA DIGITAL high transfer rate ink can meet the market demand for low-weight sublimation paper printing, high-speed printing, high color intensity, energy saving, and environmental protection, and simultaneously play a role in reducing printing processing costs, forming a strong competitive advantage.
YIQIA DIGITAL (www.yiqiadigital.com) is the industry’s leading one-stop provider of digital printing. We supply sublimation paper, sublimation ink, and DTF consumables, and needed for the customer. YIQIA DIGITAL has a global presence in many countries, including emerging and mature markets. We have a well-established sales system and are committed to helping our customers improve their digital printing business with our expertise and first-class service.
What are the dangers of using poor-quality DTF PET Film?
A. Scratches the nozzle.
B. Ink will flow when printing.
C. Uneven print pattern color.
D. The printed pattern is a lot of oil.
E. Printed patterns are hard to peel.
F. Printed patterns shake powder shake not clean.
G. Printing pattern intermittent and with broken lines.
H. Printed patterns are prone to cracking and peeling.
Maybe you are also interested in this article: How to Choose DTF PET Film?
YIQIA DIGITAL DTF PET Films are carefully selected and tested, have exceptional ink receptivity, apparent printing effect, and have antistatic and anti-blocking properties.
YIQIA DIGITAL is the industry’s leading one-stop provider of digital printing. We supply sublimation paper, ink, DTF consumables, and customer needs. We have a well-established sales system and are committed to helping our customers improve their digital printing business with our expertise and first-class service.
With the gradual maturity of DTF printing technology, more and more people in the market began to use DTF printing. DTF ink is one of the indispensable consumables in DTF printing, so how to use DTF ink correctly? Let’s find out together.
1. Add ink to the ink cartridge, please add it according to the color identification.
2. It is recommended to use a funnel to assist when adding ink to avoid ink spillage.
3. If you want to replace a different brand of DTF ink, clean the relevant ink cartridges and ink paths to avoid mixing different inks to produce impurities that block the printhead.
Maybe you are also interested in this article: How to Choose DTF PET Film?
YIQIA DIGITAL inks are carefully selected and tested, this ink can reduce print head clogging and dryness. It can withstand countless washing cycles without fading.
YIQIA DIGITAL (www.yiqiadigital.com) is the industry’s leading one-stop provider of digital printing. We supply sublimation paper, sublimation ink, DTF consumables, and needed for the customer. YIQIA DIGITAL has a global presence in many countries, including emerging and mature markets. We have a well-established sales system and are committed to helping our customers improve their digital printing business with our expertise and first-class service.
In the process of DTF printing, often encounter some troublesome small problems. We have put together a list of film problems commonly encountered in the DTF printing process and provide you with solutions that will hopefully help your DTF printing go more smoothly.
Q1: Why is the printing pattern intermittent and with broken lines?
A1: It’s possible that the printhead of the DTF printer is clogged. If you do not run the DTF printer for more than two days, the ink will dry out and clog the printhead. Or if poor quality ink is used it can also cause the printhead to clog.
Simple clogging can often be remedied by performing a print head cleaning cycle and nozzle check on your printer.
Q2: Why is it hard to peel the printed pattern?
A2: DTF PET film has two types of coatings, an ink-absorbing layer for printing patterns and a release layer that is easy to tear off after transfer. This situation occurs because the release layer of the film is not coated well, and it is the quality of the film.
Q3: Why is the color of the printed pattern uneven?
A3: The ink-absorbing layer of the DTF PET film is not applied properly, which is also a quality problem of the film.
Q4: Why does ink flow down when printing?
A4: When printing, the correct printing surface is not distinguished, or the PET film is not good and the film has a low ink loading capacity.
Maybe you are also interested in this article: How to Choose DTF PET Film? YIQIA DIGITAL has a global presence in many countries, including emerging and mature markets. We have a well-established sales system and are committed to helping our customers improve their digital printing business with our expertise and first-class service.
If you want to know more, please click the contact information below, YIQIA DIGITAL is at your service.
You have many choices when it comes to DTF transfer films, powder, and inks. Finding the right combination of film, ink, and powder is key to the success of your DTF transfer. But many customers do not know how to test DTF transfer film samples to determine the quality.
Here is advice from our production technical experts to help you make better choices.
How to test?
1. The surface of DTF PET film
Check whether there are black spots, scratches, and folds on the film surface, which will directly affect the printing effect and are the primary indicators to judge the quality of the film.
2. Test the film with your DTF printer
A. Smoothly Printing
Printing is the first step to verifying the quality of DTF film, the essential requirement is whether it can be printed smoothly and completed without jamming or warping.
B. Ink Absorption Capacity
Observe whether the ink will flow after printing. Films with low ink-carrying capacity seriously affect the transfer effect.
C. Heat Resistance
The heat resistance of the film can reflect the quality of the film. If the heat resistance of the film is not enough, the hot melt adhesive powder and the ink are not sufficiently dried and melted, which will cause the film to break, and thus the printing will fail. So you must choose a film with better heat resistance, but the heat resistance is not as long as possible.
D. Printing effect
The color reproduction of the pattern and the vividness of the color is also one of the important judgment criteria. Uneven transfer pattern color? This is a sign of poor quality transfer film.
A fine powder is defined as 0~70 micron particle size (like flour).
Features: suitable for small letter powder-coating, hand-feeling is relatively good, but the fastness will be poor when the air humidity is high, and it is accessible to adhesive powder on the blank area of the printed film.
Medium Powder
Medium powder refers to 70~170 micron particle size (like table salt).
Features: obviously granular, but at present 85% of customers use medium powder because compared with fine powder, this powder is easy to clean by shaking. And the hand-feeling is good compared with coarse powder.
Coarse Powder
Coarse powder means 120-240 micron particle size (like sugar).
Features: big gap, easy to shake powder clean, good three-dimensional sense (recommended coarse powder when wet in summer, or customers require a three-dimensional sense of time can be used), but relatively high consumption than the medium powder.
Hot melt powder is an indispensable material in the DTF transfer technology, TPU powder is widely used in DTF transferring process, and you can see both white and black powder in the market.
The difference between white and black:
The white powder is suitable for any fabric color clothes, But usually, white or light-colored garments are used more.
Black powder is mainly composed of TPU rubber powder & activated carbon and is more suitable for black or dark-colored clothes, some fabrics like polyester and bags are commonly used.
DTF printing can be used for transferring on all fabrics, with no material limitations, such as knitting, textile, nylon, non-woven fabric, Oxford cloth, etc. Also, the cost is relatively low, and it is favored by more and more clothing customization companies. So how choosing a good DTF PET Film is very important.
In this article, we will introduce the difference between single and double-sided, cold peel-off, and hot peel-off, so that you can make a better choice.
1. Single and Double-sided DTF PET Films Difference
Single-sided films offer a more neutral and natural look. Therefore, they are suitable for achieving a vintage look such as sepia or black and white.
Double-sided films are with friction, are more stable than single-sided feeding, the film will not shift, also effective in preventing static electricity, and the printing quality is higher.
2. Cold and hot peel-off DTF PET Films Difference
The main difference between cold and hot peel-off is the production efficiency, and there is not much difference in the final appearance of the product.
Cold-tear DTF film is more cost-effective than hot-tear but needs to wait until the film is cold after the transfer and then peel off.
Hot-tear DTF film can be peeled off directly after the transfer, saving time in the production process and being suitable for mass production factories.
3. Thickness of DTF PET Films Difference
75μ thickness DTF Films can save the use of ink, making them more cost-effective.
100μ thickness DTF Films enhance the color, creating a more deep and vibrant finish. Therefore, they are suitable when you want to emphasize the colors of your design.
The principle of DTF printing is straightforward – printing on a particular film, then transferring to the chosen fabric or leather using a heat press. This new technology combines the best of digital inkjet printing and transfer printing. That is becoming more and more popular because of its low cost, high flexibility, and wide range of applications.
Benefits
Applicable material multi
DTF printing allows you to work with any fabric, not just cotton.
Cost-Effective
Lower ink consumption costs.
DTF Printing Equipment & Supplies are also significantly more affordable.
Production Speed
DTF printing has no pretreatment process, able to speed up production.
No need for pre-treatment
If you are familiar with the production of a direct-to-garment (DTG), you must know the pretreating of garments before printing. With DTF, you can omit this part of the procedure.
Washability & Durability
Testing has proven to be equal to if not better than traditional direct-to-garment (DTG) printing.
Easy Application
DTF printing makes it easy to apply artistic designs too difficult areas of garments or fabrics.
Producing ready-to-wear samples is fast and suitable for small batch production, making it the perfect choice for small and medium-sized enterprises.
Excellent performance
High Stretchability and Soft Hand Feel.
For small-scale printing, where you are looking for good color results and you don’t want to make a large investment, DTF may be more suitable.
Disadvantage
Poor air permeability in the print pattern area.
The result of the print on fabric has a slight rubberish feel as compared to prints done using the DTG process on a white t-shirt.
The different hand feels compared to DTG prints.
Need to pay attention to the storage environment of dtf hot melt powder. High temperature & humidity can cause quality issues.
DTF printing is not a perfect replacement for DTG, but its many advantages make it an ideal complement to DTG.
A DTF printer uses PET films as these are different from the ones used in screen printing. These films are also known as DTF Transfer Films in the market. DTF PET films are available in 75u and 100u thicknesses, depending on the temperature, also divided into two categories, cold-peel type films, and hot-peel type films, them has excellent-transferring characteristics. You can see more details about DTF PET films at YIQIA Digital.
RIP Software for DTF Printer
For DTF printing, RIP software is an integral part, you will require specialized RIP software to handle your white and CMYK colors. This is because software affects the color performance, the printing characteristics of the ink, and the final print performance.
Hot-melt adhesive powder is designed to adhere inks to fabrics using DTF printing. Creates a thin adhesive layer on the wet ink deposited on the transfer film, this helps bind the colored pigments in your printer to the surface you are printing on.
DTF printing ink is specially designed for Direct to Film printing and heat transfer. This pigment ink formulation can reduce print head clogging and dryness. It can withstand countless washing cycles without fading.
YIQIA Digital offers different colors of DTF inks such as white, yellow, black, magenta, cyan, orange, green, and also fluorescence pink & fluorescence yellow.
This Direct Film printer component speeds up your production by printing, powdering, shaking, and melting the powder for final and ready DTF transfers.
Curing Oven
This small industrial oven is used in the Curing process, to melt the printer’s hot melt powder, which then goes on the transfer film.
Heat Press Machine
A heat press is a type of machine that utilizes heat in order to apply designs onto various substrates, this equipment helps transfer the printed images on your film onto the desired surface or fabric.
YIQIA DIGITAL has a global presence in many countries, including emerging and mature markets. We have a well-established sales system and are committed to helping our customers improve their digital printing business with our expertise and first-class service.
If you want to know more, please click the contact information below, YIQIA DIGITAL is at your service.
